I removed the rear axle from the lawnmower!
Two bolts were the only thing holding it on. Once I took those off, I was able to get the belt off without too much trouble.
The tires still have to come off. The bolts holding them on did not loosen on the first try. I'll take another shot tomorrow from the comfort of the sealed garage. Then, it's time to crack open the case to retrieve the differential, the shifting mechanism, and the bevel gears inside. The front end can be finalized once we have these pieces.
I also fit the 28 tooth sprocket onto the hub-conversion brackets. 4 of 6 fit easily. But 2 of the holes were not on the same bolt circle. I enlarged those 2 holes enough that I can now secure all 6 bolts.
I've been finalizing the rear mounts. I think we're close to making the parts that will secure the rear wheel to the main truss.
No comments: